THE AMPLIFIER PLATFORM THAT REDEFINES POWER AMPLIFICATION

Powersoft X Series raises power amplification to a new standard of quality and usability. Powersoft X Series innovates the concept of amplifier platform: it implements a new system of channel routing, new worldwide compatible three phase power supply and a revolutionary full featured DSP.

Powersoft X Series natively supports AES3, two redundant Dante™ by Audinate® digital streams and analog inputs, providing up to 4 different selectable input sources per channel.

TOP CLASS AMPLIFICATION COVERING ANY POWER NEEDS IN TOURING APPLICATIONS

The K Series is the flagship of Powersoft's technologies, ranking in the "Top Class" amplification of the global pro audio market. Offering various power ratings in 6 models ranging from 2 x 2400 W/ch @ 4 Ω to 2 x 9000 W/ch @ 2 Ω, still maintaining the 1 unit size, the K series represents a new milestone of switch mode amplification providing incredible power with the lowest weight and highest efficiency.

Its sonic performances set a new target for professional audio market. By using the Step-Up procedure it is now possible to increase the output power without having to change amplifier.

REDUCED WEIGHT AND DEPTH IN JUST 1U RELIABLE AND FLEXIBLE RACK AMPLIFIER

The M Series represents a superb value from a premium brand with unparalleled efficiency, good for the environment and easy on the power bill. The size and weight is an absolute minimum thanks to the 1 U standard and the reduced depth of the equipment. M Series models are available in 4 channel - providing up to 1250 W/ch on 4 ohm - and two channels  - offering up to 1500 W/ch on 4 ohm

All M Series amplifiers are available in HDSP+ETH version, offering remote control and advanced signal processing abilities thourgh Powersoft's ArmoníaPlus (Interface available for MediaMatrix, Crestron and AMX monitoring systems).

Quattrocanali offers the renowned sound quality and reliability of all Powersoft's Amplifier Platforms.

The patented SRM (Smart Rails Management) technology allows up for the maximization of the system's efficiency.

With Output Powers ranging from 300W to 1200W per channel, in-depth control, and monitoring capabilities, Quattrocanali is designed to be conveniently tailored to all small to medium-sized installation projects.

8-channel power amplifiers with up to a total of 12,000 W at 4 ohm - ideal for multi-zone applications in mid to large-scale installs.

All versions in the Series feature switchable main and aux signal inputs per channel, adequate GPI/O, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs. These 2 RU models, namely the Ottocanali 4K4, 8K4 and 12K4, implement two redundant universal switch mode power supplies with PFC and patented SRM (Smart Rails Management) technology that maximizes the efficiency of the system as well as drastically reduces power consumption.

New Ottocanali DSP+D versions feature innovative signal processing and support two redundant Dante™ by Audinate® digital streams.

The most powerful amp module ever

Showing amazing figures in terms of both output voltage (310 Vpeak) and current capabilities (200 Apeak), it’s able to drive even the most demanding applications of selfpowered subwoofers.

Specifically designed to fully exploit the potential of M-Force®, the innovative transducer developed by Powersoft, the M-Drive is able to handle extremely low impedance loads, which makes it the perfect solution for any configuration of multiple traditional transducers.

M-Drive can be equipped with any Powersoft or third-party DSP solution, and integrates DPC® technology used in both IPAL and M-Force® systems.

M-Force® is an innovative and unique transducer based on a patented moving magnet linear motor structure. Unbelievable performance in terms of power handling, electromagnetic conversion, reliability and maximum SPL are a few of the incredible innovative features and improvements with respect to conventional moving coil arrangement.

Overcome the limitations of traditional transducers

The IpalMod is the hardware/software platform provided by Powersoft and selected loudspeaker manufacturers to implement Integrated Powered Adaptive Loudspeaker (IPAL) technology, a functional solution to overcome the limitations of traditional transducers thereby setting a new state of the art low frequency sound system.

The "IPAL approach" allows a sensible increase of the "mains input to acoustic output" efficiency ratio by using a full boundary-conditions processing. This new system can be used in a number of low-frequency applications such as very high power and energy efficient subwoofers, steerable low-frequency arrays, very low distortion high SPL systems, low-frequency noise and standing waves removal.
Specifically designed to fully exploit the potential of M-Force®, the innovative transducer developed by Powersoft, the M-Drive is able to handle extremely low impedance loads, which makes it the perfect solution for any configuration of multiple traditional transducers.

M-Drive can be equipped with any Powersoft or third-party DSP solution, and integrates DPC® technology used in both IPAL and M-Force® systems.

Overcome the limitations of traditional transducers

The IpalMod is the hardware/software platform provided by Powersoft and selected loudspeaker manufacturers to implement Integrated Powered Adaptive Loudspeaker (IPAL) technology, a functional solution to overcome the limitations of traditional transducers thereby setting a new state of the art low frequency sound system.

The "IPAL approach" allows a sensible increase of the "mains input to acoustic output" efficiency ratio by using a full boundary-conditions processing. This new system can be used in a number of low-frequency applications such as very high power and energy efficient subwoofers, steerable low-frequency arrays, very low distortion high SPL systems, low-frequency noise and standing waves removal.
Specifically designed to fully exploit the potential of M-Force®, the innovative transducer developed by Powersoft, the M-Drive is able to handle extremely low impedance loads, which makes it the perfect solution for any configuration of multiple traditional transducers.

M-Drive can be equipped with any Powersoft or third-party DSP solution, and integrates DPC® technology used in both IPAL and M-Force® systems.

THE ULTIMATE FLEXIBLE MODULE PLATFORM SUITING YOUR APPLICATION DESIGN

The LiteMod Series is composed of two modules, namely the LiteMod and the LiteMod HV. Both compact amplifiers, they are capable of reaching unprecedented power to volume ratio, bringing the typical “2-channel bridgeable” configuration to a higher level of flexibility: the former delivers up to 1200W in bridged mode or 2x600W when driving small double woofers and it is the perfect solution for asymmetric load applications, whereas the latter reaches 1400 W at 16 Ω and 2x700 at 8 Ω, ideal for high impedance loads. Both models are equipped with the latest generation PFC to compose the best amplifier modules in their category.

The "IPAL approach" allows a sensible increase of the "mains input to acoustic output" efficiency ratio by using a full boundary-conditions processing. This new system can be used in a number of low-frequency applications such as very high power and energy efficient subwoofers, steerable low-frequency arrays, very low distortion high SPL systems, low-frequency noise and standing waves removal.
Specifically designed to fully exploit the potential of M-Force®, the innovative transducer developed by Powersoft, the M-Drive is able to handle extremely low impedance loads, which makes it the perfect solution for any configuration of multiple traditional transducers.

M-Drive can be equipped with any Powersoft or third-party DSP solution, and integrates DPC® technology used in both IPAL and M-Force® systems.

Small and Lightweight 2/4-Channel Amplifier Module

The D-Cell504 is an incredible mix of power and technology you wouldn't expect in such a small and lightweight amplifier: with 2x350W available at 4Ω, bridgeable to have 700W on a single 8Ω load with astonishing sound clarity, the D-Cell504 has already proven to be a wonderful solution for a very wider range of applications, from small-mid power professional loudspeakers to studio monitors, home cinema systems, musical instruments, powered mixers and even hi-fi applications.

The D-Cell504 is made of two incredibly compact units – power supply and 2-Channel output stage – each one measuring just 100x78x45mm, guaranteeing easy mechanical integration and the ability to fit almost any possible design.
The "IPAL approach" allows a sensible increase of the "mains input to acoustic output" efficiency ratio by using a full boundary-conditions processing. This new system can be used in a number of low-frequency applications such as very high power and energy efficient subwoofers, steerable low-frequency arrays, very low distortion high SPL systems, low-frequency noise and standing waves removal.
Specifically designed to fully exploit the potential of M-Force®, the innovative transducer developed by Powersoft, the M-Drive is able to handle extremely low impedance loads, which makes it the perfect solution for any configuration of multiple traditional transducers.

M-Drive can be equipped with any Powersoft or third-party DSP solution, and integrates DPC® technology used in both IPAL and M-Force® systems.